Arduino DS1302 RTC Real Time Clock Module with Battery CR2032

Arduino DS1302 RTC Real Time Clock Module with Battery CR2032

Product Code: RTC Module
Availability: In Stock
Stock Ready: Kuala Lumpur
Price:
RM3.50

Qty:
- +
   - OR -   

Description :
DS1302 is DALLAS company launched a trickle charge clock chip, containing a real-time clock / calendar and 31 bytes of static RAM, communicating through serial interface simple and single chip microcomputer. The real-time clock / calendar circuit provides seconds, hours, days, weeks, months, years of information, number of days in the month and leap year can automatically adjust. The clock operation instructions through the AM/PM decided to use 24 or 12 hour format.

Between DS1302 and single chip microcomputer can simply use synchronous serial communication method, only three lines:
(1) RST
(2) I/O reset the data line
(3) SCLK serial clock.

Clock /RAM read / write data to a byte character set or as many as 31 byte communication. DS1302 work power consumption is very low to keep the data and clock information when power is less than 1mW

The main performance index of DS1302:

1. real-time clock has the capability to calculate before 2100, when Japan, seconds, weeks, months, years,, have the ability to leap year adjustment

2. 318 temporary data storage RAM

3. I/O serial port mode makes the pin number a wide range of working voltage of 2 5.5V

4.working current of 2.0V, less than 300nA

5. read / write clock or RAM data with two kinds of mode of single byte transfer mode and multi byte character set

6.8 pin DIP package or optional 8 pin SOIC package based on the surface assembly

7. simple 3 wire interface

8. compatible with TTL Vcc=5V

9. optional industrial temperature range of -40 +85

10.double power supply pipe for main power and backup power supply

Wiring method (to provide procedures for example, can pick up any IO port, in the procedure to modify the port definitions :

The VCC → +5V/3.3V

The GND → GND

The CLK → P02

The DAT → P01

The RST → P00

Matters needing attention:

1.VCC and GND do not reversed, so as not to burn the chip

2.51 SCM P0 port to receive a pull-up resistor, if your computer is not connected pull-up resistor, the data can be the string to the other port.

ds1302-02.jpgds1302-03.jpgds1302-04.jpgds1302-05.jpgds1302-06.jpg

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: