Bathroom Switch Filling Brass Water Stop Triangle Valve Tap

Features:
Made of high quality material,more durable.
Surface brushing treatment,no plating,showing the essence of steel.
No rust,no lead,health and safety.
The design style is generous, elegant, very practical, strong load-bearing, very strong and durable.
The installation is simple, and the whole product can be loaded and unloaded by lightly rotating several pins.

Specifications:
Material:Brass
Color:Silver
Connection:4″
Inner diameter:18mm
Total length:85mm
Working pressure:1MPa
Operating temperature: <80 ° C

Package included:
1 × Triangle valve

Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.

Installation steps:
1. Lay water inlet pipe at the appropriate height of the wall;
2. Wrap the thread with the raw material belt, put it into the decorative cover, and screw it into the inlet pipe;
3. Insert the screwdriver into the outlet and rotate the inlet end into the wall inlet pipe;
4. Connect the pipe water source, and check whether the thread part is sealed.

Installation precautions:
1. Before installation, water should be discharged to thoroughly flush the sediment and dirt in the water pipe to ensure that the pipe is clean;
2. During installation, wrap appropriate raw material belt on the front thread of the Angle valve to adjust the Angle of the Angle valve;
3. First tighten it clockwise by hand, then insert the screwdriver into the outlet and rotate it clockwise tightly;
4. Do not use spanner to jam the screw mouth of Angle valve and avoid product damage caused by improper installation.

Write a review