GM320 Thermometer Temperature Tester 50C - 330C non contact

This BENETECH GM320 Non-Contact IR Infrared Laser Temperature Meter -50 - 380 applies the principle of infrared for inducing surface temperature of a object, particularly high temperature object. The infrared laser temperature is especially widely used in steel casting, machine components, furnace temperature and etc. Sophisticated manufacture makes it feature high precision, high resolution and low repeatability. LCD screen with backlight design enables you to get data easily and clearly even in the dark. This infrared thermometer is a complete combination of maximum / minimum /average value / D-value, high / low temperature alarm setting, data storage function, etc. It is convenient and helpful without contact object directly. What a practical tool! 

FEATURES

• Data Hold function
• Laser Target Pointer ON / OFF selection
• Backlight ON / OFF selection
• Auto Power Shut Off in 7 seconds without any operation
• Results in less than 500ms, / conversion
• Consist of optics, temperature sensor, signal amplifier, processing circuit and LCD display
• Laser on/ off switch, Auto power off & temperature data hold
• Precise non-contact IR thermometer, safe and easy to use
• Suitable for hot water pipes, hot engine parts, cooking surfaces, hot tubes insulation, electrical connection, ballasts in electric lights, electric motors, bearings, wine coolers hot asphalt, swimming pools, fish tanks, hot & cold food products, heating air conditioning, etc

• HOW TO USE:
  1. Press and continue to hold down the trigger to take temperature readings (SCAN appearing on the display indicates measurements are being taken)
  2. release the trigger (HOLD appearing on the screen indicates that the unit is no longer taking temperature measurements), the last temperature will display and hold on the screen;
  3. the display will turn off automatically after 15 seconds without any operation.
   

• NOTE:
  1.This unit is NOT a medical thermometer, so it is NOT USED FOR measuring human or animal body temperature;
  2. the target must be optically (infrared-optically) visible to the IR thermometer (high levels of dust or smoke make measurement less accurate);
  3. ONLY SURFACE temperatures can be measured;
  4. ENSURE there is not other hotter body near the target which makes measurement less accurate;
  5. DO NOT point the laser at humans eyes (eye damage may result from direct exposure to laser light);
  6. DO NOT use the solvent to clean the lens;
  7. DO NOT put this unit in water.
   

• TIPS: The D:S ratio of 12:1 means the ratio of the distance to the size of the spot being measured is 12:1. For example, an objects diameter of 100 mm can be measured from 1200 mm.
   

Specifications

Package Includes

• 1 x GM320 Infrared Thermometer
• 1 x User Manual

Write a review