9V CHARGER

Product description : 

Charge 2 or 4 AA / AAA Ni-MH / Ni-cd batteries, or 2 units 9 V Ni-MH / Ni-cd batteries. 
Controlled by MCU, and use de- V charge pulse technology, avoid the charger from over-charging, over-discharge, overcurrent and overheating. 
Can be applied to the voltage supplied worldwide. 

Electrical Specification: 
Input: 100-240 V AC 50 / 60Hz 
Output: 2.4 V 600-670mA for AA / AAA batteries, and for 9 V batteries, it is $ number ma when voltage reaches 6-7 V, When 
8.4V , $ number ma when 9.6V battery charge saturation rate:> 80% 

Note: 
This battery charger is used for AA / AAA Ni-MH / Ni-cd batteries, and 9V Ni-MH / Ni-cd batteries. 
The absolute 0 V battery can not be charged. 
You can not charge alkaline or carbon batteries.

--------------------------------------------------------------------------------------------------------------------------------------

C905W CHARGER

• Designed for AA / AAA Ni-Mh / Ni-Cd battery rechargeable batteries
• Can charge 1-4 pcs. AA / AAA Ni-Mh / Ni-Cd batteries at the same time
• Provides 4 independent charging slots
• LCD intuitive display of charging status, easy to use
• Intelligent computer chip to control the charging process.
• A.V. intelligent technology to cut fast charging mode, automatic translation to trickle charging mode, reliable and safe
• from overcurrent : DC charging current mode to prevent current fluctuations affect the batteries
• Protection against overheating : When overheating (60 Deg.C or higher) occurs in charging the battery or charger, it will stop charging automatically
• Short circuit protection to prevent short circuits and ensure the use of safety
• Auto-detect function : identify no battery power, short-circuit battery and defective battery, then the charger will not charge it to ensure safe use
• Refreshing battery function : it can activate and repair battery waste (low voltage-0-0.9V)
• Auto power off function : If the batteries are fully charged, the charger will cut off the power automatically
• worldwide tension, suitable for countries around the world

Specifications :

• Input: 100-240 V AC 50/60 Hz
• Output: 1.2V DC 1200mA
• A. A. Battery: 1200mA x 1, MAX 2, MAX 3, MAX 4
• AAA batteries: 600mA x 1, MAX 2, MAX 3, MAX 4
• Type : charger
• Model : C905W
• Connector : UK adapter
• Charge Cell Type: ni-mh, NiCd
• Compatibility: AA, AAA
• Battery Number of batteries: 4
• Input Voltage: AC 100 ~ 240V 50/60 HZ
• LCD Screen : YES
• Indicator : the light goes out after a full charge

​------------------------------------------------------------------------------------------------------------------------------------

Description :

• It is capable for charging 1 to 4 AA / AAA batteries.
• 4 independent channels to prevent the batteries from charging each other.
• LED battery indicator to show the status of battery charging.
• Automatic 1.2 V battery pack voltage and polanty detection.
• Overcharge protection and short circuit protection.
• Can be charged by computer / mobile phone USB interface or power bank, portable to use.

​U82 CHARGER

Specification :

• Input: DC  5V (USB)
• Output: DC 1.2V  150mA (AA) / DC 1.2V   150mA (AAA)
• Suitable for Battery Capacity: 500 - 3400mAh
• Product Standard: GB4706.18-2014
• Battery Charge Rate ~ 99%
• Size: 104mm x 68mm x 29mm

UK83 CHARGER

Specification:

• LCD indicate the charging process.
• Worldwide voltage
• Suitable for the whole world.
• Charging in constant current and voltage to prolong the battery working life.
• Only charging for all 1.2V Ni-MH & Ni-CD rechargeable battery, do not charging for other type of batteries.
• Available for: 1- 4 pcs AA/AAA Ni-CD/Ni-MH rechargeable battery
• International Universal USB Plug can be chosen via Power Adapter.
• Input: DC  5V
• Output: DC 1.2V    500mA      AA
•                     DC 1.2V    300mA      AAA
• Battery Charge Rate ~ 99%
• Size: 114mm x 120mm x 30mm
• Storage temperature: -20℃~35℃
• Operating temperature: 0℃~35℃
• Product Standard: GB4706.18-2008

​

Instructions:

• Keep it away from miost and heat.
• LED indicate the charging process.
• Worldwide Voltage, suitable for the whole world.
• Charging in constant current and voltage to prolong the battery working life.
• Only charging for 1.2V NI-MH/NI-CD battery,do not charging for other type of batteries.
• Suitable for charging 1-4 pcs AA/AAA NI-MH or NI-CD rechargeable battery

Warnings:

• - Use only AA / AAA Ni-MH Ni-CD Battery.
• - It is normal that the charger and batteries may become hot when charging.
• - Use caution when handling.
• - Use the charger properly to avoid electric shock.
• - To charge battery before use.
• - For batteries, 2 or 3 times charging and discharging are required. If batteries are stored for more than one week, recharge them before use.