Your shopping cart is empty!
0.96 1.3 Inch OLED Display Module 128x64 Pixel Luminous
0.96 1.3 Inch OLED Display Module 128x64 Pixel Luminous
Product Code: OLED Display
Availability: In Stock
Stock Ready: Kuala Lumpur
Availability: In Stock
Stock Ready: Kuala Lumpur
Price:
RM13.99
- OR -
0.96 Inch I2C IIC OLED Display Module 128x64 Pixel SSD1306 Luminous
- 0.96 inch OLED display with a resolution of 128 x 64 and a viewing angle greater than 160°. It supports a voltage range from 3.3V to 5V DC, with a normal operating power consumption of 0.04W and a power consumption of 0.08W when the screen is fully lit.
- The I2c OLED display module uses an SSD1306 embedded driver IC and communicates via the I2C/IIC interface, requiring only two I/O ports. The I2C address can be changed for easy compatibility with different devices.
- The OLED display module is compatible with Raspberry Pi, Beagle Bone Black, Arduino Nano, UNO, R3, Mega, 51 MCU, and STM 32.
- Raspberry Pi screen module does not require a backlight and has an ultra-high contrast ratio, making small fonts clear and easy to read. There are no embedded fonts in the module; users can create fonts using font generation software.
- The module pins are soldered and housed in a small box to prevent them from falling off during transportation. The OLED glass surface is covered with a removable transparent scratch-resistant film.
1.3 Inch IIC I2C OLED Display Module 128x64 Pixel Module (White)
- 1.3-inch OLED screen, self-luminous material, no backlight, ultra-low power consumption, normal display is only 0.06W. Blue display.
- 128x64 resolution, the display effect is clear and the contrast is high. The viewing angle is greater than 160°. Even small fonts are easy to read.
- Wide voltage power supply (3V~5V), compatible with 3.3V and 5V logic levels, no need for level conversion chips.
- Embedded driver IC: SH1106. Using the IIC/I2C bus, only 2 IOs are needed to light up the display.
- Compatible with R3 board and Mega, Raspberry pi, 51 MCU, STIM 32 etc. Provide underlying driver technical support(Contact us for instructions).
- Parameter:
- Display Color: white or blue
- Screen Size: 1.3(inch)
- Screen Type: OLED
- Driver IC: SH1106
- Resolution: 128*64 (Pixel)
- Module Interface: I2C interface
- Active Area: 29.42x14.7(mm)
- Module PCB Size: 33.7x35.5(mm)
- Visual Angle: >160°
- Operating Temperature: -20℃~60℃
- Storage Temperature: -30℃~70℃
- Operating Voltage: 3.3V~5V
- Rough Weight: 10(g)
Package include: 1.3inch or 0.96inch oled display module -1unit (come with plastic box)
Write a review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: